link to Home Page

Mixer


Mixer
The gas is mixed with the intake air tangentially. This makes mixing very efficient. The gas content is controlled with a flap mounted in the air pipe before the mixing unit. This flap need not to be completely air tight. The power of the ICE is controlled with a flap mounted in the intake pipe after the mixing unit. This flap must be exactly correctly shaped, otherwise the idling speed can not be adjusted. The later flap is equipped with a screw for idling speed adjustment. The flaps must be supported gas tight. Suitable material for the bearing bushes is for example nylon which produces a maintenance-free construction. The flaps are controlled with levers mounted on a suitable location.

Translated by Olli.

icon